The Future of a Hydraulic Moulding Machine

The future of a hydraulic moulding machine is a bright one, thanks to recent OEM investment and continued technological advances. Smarter control systems may soon match the precision and energy-saving performance of an all-electric machine. As more electronic components are integrated into a hydraulic motion control package, the performance of this type of machinery continues to improve. And with clamp pressures increasing by the day, the only limitations are the size and number of machines.


As a result, punching mold manufacturers of molded products have had to deal with a tough economic climate. The economy has impacted business across the U.S. and Europe for years. While businesses began to recover slowly in 2003, the demand for molded products remains high. This has led molders to look for ways to reduce costs. For example, the cost of repairing hydraulic systems is estimated at $600 billion a year. Therefore, the right lubricant can be worth its weight in gold.


hydraulic moulding machine


Generally Speaking, A hydraulic moulding machine's clamping unit is a critical piece of equipment. It must provide sufficient locking force to keep the mold closed during injection. For thin-walled parts, the clamping unit must be capable of delivering three to four tons of clamp force per square inch. A similar amount of clamp force is needed for thick-walled parts. However, the clamping unit is often overlooked, so it is important to make sure that the machine is able to meet your requirements.


The main drawback of a hydraulic manual moulding machine is its energy consumption. It requires a lot of energy to run, and it uses a lot of water to cool the plastic. It is also not a good choice for clean-room environments. Its energy requirements make it an undesirable option for a manufacturing environment. It requires more time and higher temperatures to mold parts. A hydraulic machine should also be installed in a clean room.



The clamping unit is a crucial part of a hydraulic moulding machine. It needs to supply enough locking force to keep the mold closed during the injection process. If the plastic is poured in, it will harden inside the mold, which is then extruded out as a part. It is not uncommon for the hydraulic moulding machine to leak its hydraulic oil, which can lead to a variety of complications. It is vital to avoid any accidents while using a hydraulic moulding machine.


Ginifon's hydraulic moulding machine is essential for a large number of applications. A large number of industrial processes require hydraulic pressure to work effectively. The hydraulic moulding machine must be capable of supplying enough pressure for the clamping unit to keep the mold shut during the injection process. It should have a locking force of three to four tons per square inch of the mold cavity. if you are planning to order our hydraulic moulding machine, welcome to make an requiry to us via our email.





Foshan Ginifon Mould Machinery Co., Ltd.

We are always providing our customers with reliable products and considerate services.

If you would like to keep touch with us directly, please go to contact us

  • Home


  • Tel


  • Email


  • Contact